manualshive.com logo in svg

Canon ImageRunner 5000 Series, User Manual

Share
Download
Canon ImageRunner 5000 Series User Manual Download Page 152

Erasing Shadows and Frame Lines from Copies (Frame Erase)

3-25

Useful Cop

y Functions

3

●

Book Frame Erase 
Erases the dark border as well as center and contour lines that appear when copying facing 
pages in a bound original onto a single print paper.

IMPORTANT

• In the Book Frame Erase, combined use with the Entire Image, Booklet, Image Combination, Image 

Separation, Image Repeat, and Mirror Image modes cannot be set.

●

Binding Erase 
Erases the shadows that appear in copies from binding holes in originals.

IMPORTANT

• In the Binding Frame Erase mode, combined use with the Entire Image, Book 2-Sided, Two-page Sepa-

ration, Booklet, Image Separation, Image Repeat, and Mirror Image modes cannot be set.

• Do not place originals with binding holes in the feeder, as this may damage the originals.

Original

Book Frame 
Erase selected

Copy

Copy

Book Frame Erase 
not selected

Original

Binding Erase 
mode selected

Copy

Copy

Binding Erase 
mode not selected

E82_US.book  Page 25  Tuesday, May 22, 2001  12:11 AM

Summary of Contents for ImageRunner 5000 Series












































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands