manualshive.com logo in svg

Canon ImageRunner 5000 Series, User Manual

Share
Download
Canon ImageRunner 5000 Series User Manual Download Page 400

Loading Paper and Adding Toner

7-3

7

Loading P

aper and Adding 

T

oner

1

Press, then release the paper drawer release 
button of the paper drawer in which you want 
to load paper.

2

Grip the handle and pull out the paper drawer 
until it stops.

NOTE

• If the drawer seems to be stuck halfway, do not pull 

it out by force. Push it back into the copier, and 
then try pressing the release button and pulling it 
out again.

E82_US.book  Page 3  Tuesday, May 22, 2001  12:11 AM

Summary of Contents for ImageRunner 5000 Series












































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands