Canon ImageRunner 5000 Series User Manual Download Page 204

Page: 204 / 523

Flow of Mail Box Operations

4-7

Using the Mail Bo

x Functions

Enter the password, then press the [OK] key.

NOTE

• Enter the password used when the box was stored.

(See “Setting/ Storing the Box,” on p. 6-46.) If a
password has not been stored, this operation is not
necessary.

Select the document you want to print.

NOTE

• When there are more than 4 stored documents,

press the [

▼

] or [

▲

] key to display the other docu-

ments.

• You can select multiple documents stored in the

box.

• The selected documents are numbered in the order

specified, and are printed in the order numbered.

• When you press the [Select All] key, you can select

all documents in the box (The key changes to the
[Clear Selection] key).

• You can cancel the selection by pressing the docu-

ment again.

• When you press the [Clear Selection] key, you can

cancel all selection of the documents (The key
changes to the [Select All] key).

Press the [Print] key.

E82_US.book Page 7 Tuesday, May 22, 2001 12:11 AM

Summary of Contents for ImageRunner 5000 Series












































































































































































































































































































































































































































































































































Search results

Summary of Contents for ImageRunner 5000 Series

Reviews:

Brands by name

Popular brands

Canon ImageRunner 5000 Series, User Manual

Search results

Summary of Contents for ImageRunner 5000 Series

Reviews:

Brands by name

Popular brands