Canon ImageRunner 5000 Series Page 192 User Manual Download

Page: 192 / 523

Making Copies with Image Reversed (Mirror Image)

3-65

Useful Cop

y Functions

Making Copies with Image Reversed

(Mirror Image)

This function copies images as if reflected in the mirror, reversing the right and left sides.

IMPORTANT

• In the Mirror Image mode, combined use with the Cover/Sheet Insertion, Shift, Booklet, Margin, Frame

Erase, Image Combination, and Image Repeat modes cannot be set.

Place the original and press the [Special Fea-
tures] key.

Press the [

▼

] key to display the Special Fea-

tures screen (2/2).

Mirror Image

Original

Copy

E82_US.book Page 65 Tuesday, May 22, 2001 12:11 AM

Summary of Contents for ImageRunner 5000 Series












































































































































































































































































































































































































































































































































Search results

Summary of Contents for ImageRunner 5000 Series

Reviews:

Related manuals for ImageRunner 5000 Series

Brands by name

Popular brands

Canon ImageRunner 5000 Series, User Manual

Search results

Summary of Contents for ImageRunner 5000 Series

Reviews:

Related manuals for ImageRunner 5000 Series

Brands by name

Popular brands