manualshive.com logo in svg

Canon ImageRunner 5000 Series, User Manual

Share
Download
Canon ImageRunner 5000 Series User Manual Download Page 225

4

Using the Mail Bo

x Functions

Scanning Originals into a Box

4-28

4

Press the [Done] key.

5

Start scanning the original.

(See “Storing Originals in the Box,” on p. 4-3.)
For the next two facing pages, place the original and press the

 

key again. When scanning is 

completed, press the [Done] key.

NOTE

• To cancel the setting, press the [Special Features] and [Two-page Separation] keys in that order.
• To cancel the settings, press the [Initial Settings] key. (The machine returns to the Standard Scanning 

mode.)

• When you press the 

 key, the display returns to the Box selection screen.

Scanning Originals for Use as a Booklet (Booklet Scanning)

You can scan originals in such a way that, when printing the scanned data, the output papers can be 
easily made into a booklet. Specify the Booklet mode when printing the scanned data. (See “Making 
Prints for Use as a Booklet (Booklet),” on p. 4-72.)

IMPORTANT

• In the Booklet Scanning mode, combined use with the Two-page Separation, Different Size Originals, 

Frame Erase, and Image Combination modes cannot be set.

• When you place the originals used in the vertical direction horizontally and scan them, the images of the 

even number pages will be printed upside down. Place these originals vertically.

1

Prepare to scan the original into the box following the procedure below.

Select the desired box number

Place the original

NOTE

• When you select a box set with a password, enter the password after selecting the box.

Start

Reset

MAIL BOX

E82_US.book  Page 28  Tuesday, May 22, 2001  12:11 AM

Summary of Contents for ImageRunner 5000 Series












































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands