Calrec BRIO 36, User Manual

Page: 81 / 210

81
Providing Console Wide Strip User Controls
Tap the Strip User Controls area on the bottom left of the touchscreen. This presents the user with a selection of
controls that the Rotary Control, S1 and S2 buttons can be set to as a console wide function.
Setting the Rotary Function to Trim will change the Rotary control on all the fader strips to be a Trim control.
The S1 & S2 buttons can be configured for various functions or GPIO control.
Figure 3 shows all the rotary controls controlling Input trim, all the S1 buttons switching Input 1/2 and all the S2 buttons
switching Layers A / B. In addition to console wide function each rotary, S1 & S2 button can be set to perform a different
function or GPIO control using Custom Strip Configuration.
This custom function is kept separately and overridden by selecting any function other than “Custom”. When “Custom” is
reselected its custom function is restored.
See “CUSTOM STRIP CONFIGURATION” on page 65 .
FIGURE 3 -
STRIP USER CONTROLS