Calrec BRIO 36, User Manual

Page: 98 / 210

98 BRIO 36
Audio Production System with Optional Networking
GETTING SIGNALS IN AND OUT
Oscillator Controls
Internal tone signals are generated by Brio 36’s oscillator which can be controlled from the oscillator setup area.
To access this, tap
OSCILLATOR in the Show menu. Brio has one internal oscillator which is controlled using the two
rotary controls towards the bottom of the screen: level and frequency. The user can set the oscillator to generate a fixed
tone at the specified frequency, or a stepped 20 Hz to 20 kHz tone sweep.
Different tone sources can be set for each path width (mono, stereo and 5.1) using the internal and external tone source
buttons. Selecting
INTERNAL uses Brio internal oscillator as the tone source for that path width, whereas selecting
EXTERNAL uses the feed that is currently patched to Brio 36’s external tone input. Each leg of a stereo or 5.1 tone
source can be muted individually.
FIGURE 5 -
OSCILLATOR CONTROLS
Clearing Tone
Tap
CLEAR TONE
at the bottom of the
OSCILLATOR
screen to quickly switch off all tone on all paths.
Tone and Talkback Active Notification
Notifications appear in the main header when any tone or talkback is active.
The notifications can be tapped to clear all tone or talkback. See Figure 6.
FIGURE 6 - TONE AND TALKBACK ACTIVE NOTIFICATIONS