Calrec BRIO 36, User Manual

Page: 162 / 210

162 BRIO 36
Audio Production System with Optional Networking
METERING
User Meters
User meters 1-4 provide metering for paths which the user wishes to display and is free to change on the fly.
The 4 user meters are placed on the meter bridge as part of the configurable meter layout. Any bus output can be chosen
as a user meter source. User meter sources can be selected quickly using the meter selector buttons to the bottom right
of the touch display when in ‘active Show’ view for each of the 4 user meters. Figure 7 shows the user meter 1 selection
pop-up, which follows a similar structure to the monitor pop-up, with a source select tab, an external inputs tab and a
settings tab. The sources tab is shown here.
FIGURE 7 -
USER METER SELECTION POP-UP
Meter Position in Audio Chain
The Metering point may be placed at the Input or Post which is the last point in the Audio Path. Note: this applies to
the “Fader Meter” on the external display and on the console surface strips themselves. The Bus meters on the external
display show the actual output, including output tone. This is accessed from the Meter & PFL button in the screen
Header. These Selections can be made per path, or applied easily to all Paths See Figure 8.
FIGURE 8 -
METER POSITION SELECTOR