Calrec BRIO 36, User Manual

Page: 170 / 210

170 BRIO 36
Audio Production System with Optional Networking
COMMUNICATIONS
Once the mix minus output has been created there is an option to set different feeds depending on whether the channel/
group fader is open or closed.
Tap to select
WHEN FADER OPEN
and the mix minus output feed pop-up appears. Within the pop-up, select one of
the following feed options:
• Nothing
• Auto minus
• Any of the 24 auxes
Next, tap the contribution button to the right. This brings up the contribution pop-up which replicates the fader setup
screen, allowing you to route any path to the contributing bus. For example, if aux 3 is selected to feed the mix minus
output, selecting any path from the contribution screen immediately routes that path to aux 3.
It is important to be sure of any changes made within the contribution pop-up as this can directly change routing for
all paths.
FIGURE 4 -
MIX MINUS CONTRIBUTION POP-UP
The path for which the mix minus was created can easily be identified within the contribution
screen as it displays the ‘receiver’ tab.