Calrec BRIO 36, User Manual

Page: 127 / 210

127
VCA GROUPS
Brio 36’s VCA group system allows you to control the level, CUT, AFL and PFL states of a group of faders from a
‘master’ fader.
Creating and dissolving VCA Groups
To create a VCA group:
1. Select the fader to be the group’s master by pushing and holding its ACCESS button.
2. Push ACCESS for the faders that are to be slaves to this master.
To remove slaves or undo the process:
1. Push and hold the master’s ACCESS button.
2. Push the ACCESS buttons for the slaves that are to be removed from the group.
By default, slave faders move along with their master faders to show the relative levels. This feature can be switched off
within Brio 36’s general settings, as shown in Figure 4 at the end of this section.
VCA Group Status Indication
FIGURE 1 -
VCA STATUS—FADER DISPLAY OPTIONS
The VCA group status indicators show
whether a fader or path is a:-
Master
Secondary Master
or Slave