Calrec BRIO 36, User Manual

Page: 142 / 210

142 BRIO 36
Audio Production System with Optional Networking
PROCESSING
PRESETS
A preset is a complete copy of a path from which you can choose elements to load onto another path.
Using presets can speed up work-flow when several paths with similar settings are required.
When a new preset is made a full copy of the path is taken. Setting the scope of a preset defines which elements of the
path are copied to a path when the preset is loaded. The scope of the preset can be set at any time.
FIGURE 1 -
PRESETS SCOPE
Creating a Preset
To create a preset from the currently accessed path:
1. Tap PATH PRESETS in the Access bar.
2. Navigate to where you wish to save the preset, making a new folder if necessary.
3. Tap
NEW .
4. If overwriting a previously saved preset a red dialogue will be displayed to warn the user of the potential overwrite.
Tap OVERWRITE or CANCEL . Otherwise, the user will be directed to enter a label and description and set the
scope of the preset, then tap CREATE NEW PRESET or CANCEL to discard any changes.
FIGURE 2 -
CREATING / SELECTING A PRESET FOLDER