Calrec BRIO 36, User Manual

Page: 169 / 210

169
Mix Minus using Auxes
When using an aux to feed a mix minus output make sure that the associated channel/group is not routed to the
contributing aux as it will not automatically be subtracted. The source channel/group is only automatically subtracted
when using the auto minus bus.
Setting up a Mix Minus output
1. Access a channel or group by pressing its ACCESS button (either above the fader or in the ‘Buses & Outputs’
screen).
2. Make sure the touch display is in ‘active Show’ view by exiting either the shows list or System Settings area and
select ACCESS from the Show menu.
3. Select the mix minus output routing tab.
4. Create a mix minus output by tapping either
MONO or STEREO .
Mix Minus Controls
• Level: Control the level of the mix minus output.
• Tone: Send tone to the mix minus output.
• Talkback: Route the talkback microphone feed to the mix minus output.
• AFL: Route the AFL of the mix minus output to the console monitors.
• When Fader Open: Tap to select a source to feed the mix minus output when the accessed path’s fader is open.
• When Fader Closed or Cut: Tap to select a source to feed the mix minus output when the accessed path’s fader
is closed.
FIGURE 3 -
MIX MINUS OUTPUT SCREEN