Calrec BRIO 36, User Manual

Page: 57 / 210

57
FIGURE 4 -
THE SHOWS LIST
Shows List for Different Sample Rates
The Shows List in Figure 4, is displaying a variety of shows including the 4 default shows at 44.1kHz, 48kHz, 88.2 kHz
and 96kHz. These shows were subsequently used to provide a show template for each operating frequency..
Note: there are 2 separate processes required for a show, loading a show sets up the DSP resources to run at the
required sampling rate is one. The other is to set the sampling frequency of each I/O box and Hydra Patchbay in H2O.
See
“I/O Boxes & Hydra Patchbays Sample Rate Selection in H2O” on page 73.
Editing a Show
Once a Show has been created it is possible to edit its label and description:
1. Select the Show to edit and tap EDIT in the control screen footer.
2. Make changes to the label and description in the pop-up.
3. Tap
SAVE or CANCEL .
Duplicating a Show
Duplicating Shows can save time when several very similar Shows are needed:
1. Select a Show and tap
DUPLICATE
in control screen footer.
2. Enter a new label.
3. Tap
DUPLICATE or CANCEL .
Moving Shows between Systems
Shows can be transferred between Brio 36s but cannot be transferred to Apollo, Artemis or Summa consoles.