Calrec BRIO 36, User Manual

Page: 94 / 210

94 BRIO 36
Audio Production System with Optional Networking
GETTING SIGNALS IN AND OUT
MIX MINUS OUTPUTS
Mix minus outputs are path-specific desk outputs, which are available for patching. Brio has a pool of 64 resources
which is shared between mix minus outputs and direct outputs.
Mix minus outputs are used to create foldback feeds using a comprehensive contribution system for defining the paths or
buses that feed the output. See
“MIX MINUS” on page 167 for detailed information on how to set up and use the mix
minus system, including a list of all mix minus controls.
Assigning a Mix Minus Output
To assign a mix minus output:
1. In ‘active Show’ view, tap the mix minus output routing tab.
2. Tap
MONO or STEREO to select the mix minus output width to be created for the currently accessed path.
If not enough resources are available for the desired output, the user can remove other direct/mix minus outputs to free-up
resources. Note: at the bottom of the pop-up the number of remaining resources is displayed.
Removing a Mix Minus Output
To remove a mix minus output:
1. Choose
NO PATH
from the path width drop-down menu in the mix minus control screen header.
2. A pop-up will appear asking the user to confirm the removal of the mix minus output. Tap either REMOVE
OUTPUT or CANCEL .