Calrec BRIO 36, User Manual

Page: 105 / 210

105
FIGURE 5 - INDEPENDENT EQ BAND 1 FOR THE C ONLY SPILL LEG OF A 5.1 PATH
EQ displays of Non-independent Controls for Stereo and 5.1 Paths
If the user selects a spill leg that has not been made independent from its master or selects an Equaliser band that has
not been made independent then the EQ display is ‘Greyed Out’ meaning that no controls are available from this page.
Figure 6 shows the EQ page for the LR Only spill legs of a 5.1 path which have not been made independent.
FIGURE 6 - NON-INDEPENDENT CONTROLS
Removing Independence from Spill Legs
Clicking on the spill legs button to the right of the Access display shown as ‘LR Only’ in Figure 6, reopens the
independence control switch table as shown in Figure 4. Turning off the independence switches overwrites the
independent control settings that this EQ Band had for this Spill Leg and replaces it with its master’s settings.