Calrec BRIO 36, User Manual

Page: 104 / 210

104 BRIO 36
Audio Production System with Optional Networking
PROCESSING
FIGURE 3 -
EQ SETTINGS
EQ Independence Controls for Stereo and 5.1 Paths
For Multichannel paths such as Stereo and 5.1 paths it is now possible to apply Equaliser processing independently for
each L or R spill leg in the case of a Stereo path, or LR, C, LFE, LsRs spill legs in the case of a 5.1 path.
Figure 4 shows the EQ page for a 5.1 path, in the path header is shown a drop down box which normally says ‘Full Path’.
Tapping on this opens an independence control table which is used to determine which spill leg controls will be made
independent of its multichannel master for any of the 6 EQ bands shown down the Spill Leg Independence column.
Sliding any of these switches makes a particular Equaliser Band for a particular spill leg will be made independent.
FIGURE 4 - INDEPENDENCE CONTROLS
As shown in Figure 4 all the controls for the LFE spill leg are independent, this is by default. The user has just made
EQ band 1 independent for the C Only spill leg of this 5.1 channel. Figure 5 on the next page shows the EQ control for
Band 1 of the C Only spill leg.