Calrec BRIO 36, User Manual

Page: 130 / 210

130 BRIO 36
Audio Production System with Optional Networking
PROCESSING
5.1 Surround Paths
If a surround path is part of a VCA group, the primary and secondary masters’ level, PFL, AFL and CUT settings will affect
all legs of the surround path. A surround path leg cannot be a VCA master or slave.
VCA Group Protection
VCA groups can be protected from being changed:
1. Tap SHOW SETTINGS at the bottom of the Show menu.
2. Select GENERAL from the left hand menu.
3. Switch VCA EDITING USING ACCESS BUTTONS ‘off’—all existing VCA groups carry on operating normally but
no changes can be made and no new groups can be created.
FIGURE 4 -
VCA GROUP SETTINGS
VCA Non-Moving Faders
The motorised VCA system can be disabled so that the Audio resultant is just the Sum of the fader values and the faders
don’t move to show the WYSIWYG resultant:
1. Tap SHOW SETTINGS at the bottom of the Show menu.
2. Select GENERAL from the left hand menu.
3. Switch VCA SLAVES MOVE WITH THEIR MASTER ‘off’—all existing VCA groups carry on operating normally but
the motors are turned off and the Audio result is now the sum of the primary master, secondary master (if any) and the
Slave positions.