BYD Suri, Owner'S Manual

Page: 210 / 224

BYD Suri Owner
‘s Manual
Maintenance7-26
holder. Insert the new bulb into the
holder directly until it reaches the
bottom of the holder.
5. Reinstall the lamp holder back to
the lamp assembly, and then rotate
clockwise until it is locked into place.
6. Test the new bulb to confirm that it
is working properly.
7. Assemble the trunk interior panels
back into place.
8. Press the interior buckle into the
hole.
Replacing the bulb of the rear
license plate lamp
1. Open the trunk.
2. Pry off the interior panel of the trunk
using a small flat head screwdriver
with tape wrapped around carefully,
and then remove the interior buckle
on the left and right corners.
Lift a corner of the trunk interior panel
carefully to make the lamp holder
visible.
3. Hold the lock knobs on the both
sides of the lamp holder tightly, and
remove the lamp holder from the lamp
assembly. Pull out the bulb directly
from its holder. Insert the new bulb
into the holder directly until it reaches
the bottom of the holder.
4. Test the new bulb to confirm that it
is working properly.
5. Reinstall the lamp holder back into
place, and then push to lock it in
place.
7. Assemble the trunk interior panels
back into place.
8. Press the interior buckle into the
hole.
Replacing the bulbs of the interior
lights and door lights
Door light bulb and interior light bulb
can be removed in the same method.
Lamp holder Bulb
Bulb
Lamp holder