BYD Suri, Owner'S Manual

Page: 209 / 224

BYD Suri Owner
‘s Manual
Maintenance7-25
NOTICE
The halogen bulbs will become very
hot when they are lit. Oil, perspiration
or scratches on the glass will cause
the bulb to overheat, thereby
breaking.
1. Remove the bottom cover fixing
bolt below the front bumper.
2. Push up the bottom cover.
3. In the case of removal of the
electrical connector from the bulb,
push the reeds on the both sides of
the electrical connector to the side,
and then pull down the connector.
4. Rotate the bulb counterclockwise a
quarter turn to remove it from the
daytime running light assembly.
5. Inset the new bulb into the daytime
running light assembly, and then
rotate clockwise a quarter turn to lock
it in place.
6. Push the electrical connector back
to the new bulb and ensure that it is
fully inserted.
7. Confirm that the new bulb is
working properly before turning on the
daytime running light.
8. Install the lower cover back in place,
and then reassemble the fixing bolts
and tighten.
Replacing the rear turn signal
lights/reversing lamps/rear light
bulbs
1. Open the trunk.
2. Pry off the interior panel of the trunk
using a small flat head screwdriver
with tape wrapped around carefully,
and then remove the interior buckle
on the left and right corners. Lift a
corner of the trunk interior panel
carefully to make the lamp holder
visible.
3. Rotate the lamp holder
counterclockwise a quarter turn to
remove it.
4. Pull out the bulb directly from its
Interior buckle
Reed
Bulb
Fixing
bolt