BYD Suri, Owner'S Manual

Page: 134 / 224

BYD Suri Owner
‘s Manual
Other devices1-126
malfunction
indicator will
blink and
then remain
on for a long
time
②
Tire
pressure
value is
displayed as:
Abnormal
Signal
whether the
correspondi
ng tire
pressure
monitoring
module is
normal or
not, whether
it is in large
electric field
for a long
time or not.
System
failure
①
Tire
pressure
malfunction
indicator will
blink and
then remain
on for a long
time
②
Text
prompt:
Please
check the
tire pressure
monitoring
system.
③
Tire
pressure
Please
check
whether the
tire
pressure
monitoring
module and
tire
pressure
control
module are
normal or
not, replace
the tire
pressure
monitoring
module or
value is
displayed as:
Abnormal
Signal control
module.
IV. Notice
1. The service time of tire pressure
monitoring module is determined by
daily driving distance and other
factors.
2. If the tire pressure is abnormal, this
system will not prevent the car from
running, so before driving the car, the
user should start the machine in static
state to check whether the tire
pressure meets the pressure value
specified by the manufacturer or not.
Do not drive the car with abnormal tire
pressure, otherwise it will damage the
vehicle, or cause personal injury to
oneself or others. If the tier pressure
is found abnormal, check it
immediately.
3. The Tire Pressure Monitoring
Module sends the information such as
tire pressure to the display at regular
time, if the sudden drop of tire
pressure or tire bursting happens
while driving, the monitoring module
can only send the data to the display
during next monitoring, which will lead
the driving out of control. If the tires
and monitoring module are both
damaged and c
an‘t send out
massages, or you doubt one of the
tires is damaged, please stop driving
immediately instead of after the
warning signals are sent out by the
display.
4. If the tire pressure monitoring
module is improperly installed, the air
tightness of tires will be influenced.
The monitoring module should be
installed and replaced by BYD
authorized dealers/technicians at
service station according to the
requirement of installation
instructions.
5. When the tire position is changed
or the tire pressure monitoring module
is replaced, match the whole tire
pressure monitoring system again by
BYD authorized dealers/technicians
at service station, or the system will
lose efficacy.
6. If the customer uses the rims not