BYD Suri, Owner'S Manual

Page: 62 / 224

BYD Suri Owner
‘s Manual
Switch Group, Lightening, Wiper, Defroster, Skylight and Reversing Assistance System 1-54
Combination Switch
Clearance light indicator: This
indicator is used to remind you that
the lights outside the car are on.
When the car light switch is at
or , the light will be on,
when the START button is placed at
ACC or OFF while the car light is not
off, this indicator will remain on. When
opening the driver‘s door, you will
hear a warning alarm.
When the car enters the anti-theft
alarm state after it is flamed out, the
power is disconnected and the remote
control is locked, the function of
automatic shut-off will make the
headlamp, clearance light and
clearance light indicator off at the
same time.
The automatic shut-off and follow
me function of the combination
switch:
1. Unlock the remote control, the
power po
sition is at OFF or ACC→
enter into the car and close the door,
turn off the light firstly→ place the
switch group at each position of the
light→ the light will turn off
automatically after 10s;
2. Unlock the remote control, the
power is at OFF or ACC→ place the
combination switch at each position of
the light, open the door and then
close it (the key of remote control can
be in or out of the car)→ the light will
turn off after 10s;
3. Unlock the remote control, the
power is at OFF or ACC→ place the
combination switch at each position of
the light→ turn on the interior light→
open the door and then close the door
(the key of remote control can be in or
out of the car)→ the light will turn off
after 10s and the interior light is on;
4. The power is at OFF→ close the
four doors and two covers→ the car
enters the dormant state (after the
remote control is locked for 10s)
→
lock the remote control for a second
time→ the ray of light will be dim and
the light is off;
5. The power is at OFF or ACC→
place the combination switch at
corresponding position→ open the
front left door and then close it,
perform the function of automatic
shut-
off after 10s→ open one of the
rear left and right doors to check
whether the light is turned on again or
not→ the ray of light will be dim and
the light is off;
6. The power is at OFF→ close the
four doors and two covers→ lock the
remote control after waiting for 5-
6s→
the ray of light is dim and the light will
be off after the remote control is
locked for 10s;
7. The power is at OFF→ close the
four doors and two covers→ lock the
remote control when the light is
automatically off after 10s→ the light
will be on again for 10s;
8. The power is at OFF→ close the
four doors and two covers→ the car
enters into the set suspend state
(after the remote control is locked for
10s)
→ unlock the remote control→
the ray of light will be dim, the
clearance light and low beam light will