Brocade Communications Systems Network Advisor 12.0.0, User Manual

Page: 802 / 1505

754 Brocade Network Advisor SAN User Manual
53-1002696-01
Zoning administration
21
6. Click Find > between the Potential Members list and the Zones list.
If the member is found, all instances of the zone member found are highlighted in the Zones
list.
Finding a zone member in the potential member list
Use this procedure to locate a zone member in the Potential Members list on the Zone DB tab.
1. Select Configure > Zoning > Fabric.
The Zoning dialog box displays.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select a fabric from the Zoning Scope list.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
4. Select the zone member in the Zones list that you want to find in the Potential Members list.
(Press SHIFT or CTRL and click each zone member to select more than one zone member.)
5. Click Find < between the Potential Members list and the Zones list.
If the member is found, it is highlighted in the Potential Members list.
Finding zones in a zone configuration
Use this procedure to locate all instances of a zone in the Zone Configurations list on the Zone DB
tab.
1. Select Configure > Zoning > Fabric.
The Zoning dialog box displays.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select a fabric from the Zoning Scope list.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
4. Select the zone you want to find in the Zones list. (Press SHIFT or CTRL and click each zone to
select more than one zone.)
5. Click Find > between the Zones list and the Zone Configurations list.
If the zone is found, all instances of the zone are highlighted in the Zone Configurations list.
Finding a zone configuration member in the zones list
Use this procedure to locate a zone configuration member in the Zones list on the Zone DB tab.
1. Select Configure > Zoning > Fabric.
The Zoning dialog box displays.
2. Click the Zone DB tab if that tab is not automatically displayed.