Brocade Communications Systems Network Advisor 12.0.0 User Manual Download Page 383

Page: 383 / 1505

Brocade Network Advisor SAN User Manual

335

53-1002696-01

Configuration repository management

FIGURE 126

Configuration file content

4. Click Close to close the dialog box.

5. Click Yes on the message.

Deleting a configuration

NOTE

This feature requires a Trial or Licensed version.

1. Right-click a device in the Product List or the Connectivity Map, and select Configuration >

Configuration Repository.

The Switch Configuration Repository dialog box displays.

2. Select the configuration you want to delete, and click Delete.

Exporting a configuration

NOTE

This feature requires a Trial or Licensed version.

1. Right-click a device in the Product List or the Connectivity Map, and select Configuration >

Configuration Repository.

The Switch Configuration Repository dialog box displays.

2. Select the configuration you want to export, and click Export.

The file chooser appropriate to your operating system displays.

3. Use the file chooser to select the location into which you want to export the configuration.

Summary of Contents for Network Advisor 12.0.0


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Network Advisor 12.0.0

Reviews:

Related manuals for Network Advisor 12.0.0

Brands by name

Popular brands

Brocade Communications Systems Network Advisor 12.0.0, User Manual

Search results

Summary of Contents for Network Advisor 12.0.0

Reviews:

Related manuals for Network Advisor 12.0.0

Brands by name

Popular brands