Brocade Communications Systems Network Advisor 12.0.0, User Manual

Page: 1063 / 1505

Brocade Network Advisor SAN User Manual 1015
53-1002696-01
Pseudo events
32
Adding a pseudo event on the escalation policy
Use the escalation policy to be notified if a critical event occurs on a product, port, or system. When
the event occurs, the escalation policy waits for a duration of time to see if the event remains in
that state. If it does, then the specified action in the definition is performed.
The following two-part procedure uses both the Identification pane of the Add Pseudo Events dialog
box and the Add Event Actions dialog box to create an event action with the escalation policy.
1. Select Monitor > Event Processing > Pseudo Events.
The Pseudo Events dialog box displays.
2. Click Add.
The Identification pane of the Add Pseudo Event dialog box displays.
3. Enter a name for the pseudo event.
4. Click the Enabled check box to enable the event, and click Next.
The Policy pane of the Add Pseudo Event dialog box displays.
5. Click the Escalation button, and then enter the duration of time the Event Processor will wait
before generating the pseudo event. Specify the escalation time in minutes or seconds.
6. Click Next.
The Events pane of the Add Pseudo Event dialog box displays.
7. Select a critical event, such as LinkDown, and click the right arrow button to move it to the
Selected Down Trap list.
8. Select a remediation event, such as LinkUp, and click the right arrow button to move it to the
Selected Up Trap list.
9. Click Next to advance to the Summary pane.
10. Click Finish to complete the pseudo event configuration.
Now, you must create a new event action definition using the Add Event Actions dialog box.
Creating an event action with a pseudo event on the escalation policy
1. Select Monitor > Event Processing > Event Actions.
The Event Actions dialog box displays.
2. Click Add to display the Identification pane of the Add Event Action dialog box.
3. Enter a name and description for the event action and click the Enabled check box to enable
the event.
4. Click Next to display the Events pane.
By default, the Events pane of the Add Event Action dialog box displays.
5. Select the Pseudo Events event type from the Show list.
The available pseudo events display.
6. Select the pseudo event you created and click Next.
The Sources pane of the Add Event Action dialog box displays.