Brocade Communications Systems Network Advisor 12.0.0, User Manual

Page: 804 / 1505

756 Brocade Network Advisor SAN User Manual
53-1002696-01
Zoning administration
21
5. Click Close to exit the Un-Zone Members dialog box.
Removing an offline device
The Management application enables you to remove an offline device from all zones and zone
aliases in the selected zone DB.
1. Select Configure > Zoning > Fabric.
The Zoning dialog box displays.
2. Select a fabric from the Zoning Scope list.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
3. Select Offline Utility from the Zone DB Operation list.
The Offline Device Management dialog box displays.
4. Select the check box for the offline device you want to remove in the Remove column.
Select the Remove check box to select all offline devices.
5. Click OK on the Offline Device Management dialog box.
A warning message displays informing you that the selected zone members will be replaced
from all zones and aliases in the selected zone DB.
6. Click OK on the message.
7. Click OK or Apply on the Zoning dialog box to save your changes.
Any zones or zone configurations you have changed are saved in the zone database.
Replacing zone members
You can replace one instance of a zone member in one zone, or all instances of the zone member
in all the zones to which it belongs.
1. Select Configure > Zoning > Fabric.
The Zoning dialog box displays.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select a fabric from the Zoning Scope list.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
4. Right-click the zone member you want to replace in the Zones list and select one of the
following options from the shortcut menu that displays:
•
Replace - To replace the zone member in a selected zone.
•
Replace All - To replace all instances of the selected zone member.
The Replace Zone Member dialog box displays.
5. Select the option from the Member Type list that you want to use to identify the replacement
zone member.