Brocade Communications Systems Network Advisor 12.0.0, User Manual

Page: 754 / 1505

706 Brocade Network Advisor SAN User Manual
53-1002696-01
Viewing and editing encryption group properties
20
•
Right- and Left-arrow buttons: You can select an encryption engine in the Non-HA Encryption
Engines table and click the Right-arrow button to add the encryption engine to the
High-Availability Clusters. (If you are creating a new HA cluster, a dialog box displays requesting
a name for the new HA cluster.) Similarly, you can select an encryption engine in the
High-Availability Clusters table and click the Left-arrow button to remove it from a cluster. The
encryption engine is removed from the table and shown as available.
•
Dual-arrow buttons: After selecting an encryption engine in both the Non-HA Encryption
Engines table and the High-Availability Clusters table, clicking the Dual-arrow button swaps the
cluster members.
NOTE
Swapping engines using the Dual-arrow button is not the same as removing one engine and
adding another. When swapping engines, all configured targets are moved from the former
HA Cluster member to the new HA Cluster member. Swapping engines is useful when replacing
hardware.
•
Configure Blade Processor Link button: When active, clicking the button displays the Configure
Blade Processor Link dialog box. Blade processor links must be configured and functioning to
enable the failover/failback capabilities of a high availability cluster. For more information,
refer to
“Configuring blade processor links” on page 540.
•
Failback button: After selecting an online encryption engine in the High-Availability Clusters
table, you can click Failback to manually invoke failback. For more information, refer to
“Invoking failback” on page 639.
FIGURE 332 Encryption Group Properties dialog box - HA Clusters tab