Brocade Communications Systems Network Advisor 12.0.0, User Manual

Page: 887 / 1505

Brocade Network Advisor SAN User Manual 839
53-1002696-01
Deleting an Allow/Prohibit Matrix configuration
25
Deleting an Allow/Prohibit Matrix configuration
NOTE
If you receive a 'FICON not supported on switch' error, refer to FICON troubleshooting for a list of
possible causes.
You cannot delete the active configuration, the IPL configuration, or a configuration that is marked
as having uncommitted changes.
1. Select Configure > Allow/Prohibit Matrix.
The Configure Allow/Prohibit Matrix dialog box displays.
2. Select the Allow/Prohibit Matrix configuration you want to delete. You can do this by expanding
the view for the switch under Available Switches and selecting a configuration, or you may
select the matrix under Allow/Prohibit Matrix.
3. Click Delete.
A confirmation message displays.
4. Click Yes to confirm.
Changing the Allow/Prohibit Matrix display
You can modify the display using the Window Arrangement list above the matrix display or the Clear
all port names option below the display.
NOTE
If you receive a 'FICON not supported on switch' error, refer to FICON troubleshooting for a list of
possible causes.
Changing window arrangement
There are three options for the Allow/Prohibit Matrix display on the Configure Allow/Prohibit Matrix
dialog box located in the Window Arrangement list above the display.
•
The matrix definitions may be cascaded (this is the default view).
•
The matrix definitions may be tiled horizontally.
•
The matrix definitions may be tiled vertically.
Perform the following steps to change the display to the desired format.
1. Select Configure > Allow/Prohibit Matrix.
The Configure Allow/Prohibit Matrix dialog box displays.
2. Select Cascade, Tile Horizontally, or Tile Vertically from the Window Arrangement list.