Brocade Communications Systems Network Advisor 12.0.0, User Manual

Page: 1062 / 1505

1014 Brocade Network Advisor SAN User Manual
53-1002696-01
Pseudo events
32
Creating a pseudo event definition by copying an existing definition
You can create a pseudo event definition by copying an existing definition. Perform the following
steps.
1. Select Monitor > Event Processing > Pseudo Events.
The Pseudo Events dialog box, shown in Figure 443 , displays.
2. Select the pseudo event definition that you want to copy from the Pseudo Events list.
Click the Duplicate button to display the Duplicate Pseudo Event dialog box.
The name of the event action is the name of the selected action with the word “copy”
appended. For example, Event1 becomes Event1 copy.
3. Enter a new name for the pseudo event definition.
4. Make the changes you want to make to the definition. Refer to “Creating pseudo event
definitions” on page 1010 for details.
5. Click Finish to save your definition.
Editing a pseudo event definition
Use caution when you modify pseudo events. Saving changes to a pseudo event definition resets
the run-time information for that pseudo event.
1. Select Monitor > Event Processing > Pseudo Events.
The Pseudo Events dialog box, shown in Figure 443 , displays.
2. Select the pseudo event definition that you want to edit from the Pseudo Events list.
3. Click the Edit button to display the Edit Pseudo Event dialog box.
4. Make the changes you want to make to the definition. Refer to “Creating pseudo event
definitions” on page 1010 for details.
5. Click Finish to save your definition.
Deleting a pseudo event
Use caution when you delete pseudo events. Deleting a pseudo event definition discards the
run-time information for that pseudo event.
1. Select Monitor > Event Processing > Pseudo Events.
The Pseudo Events dialog box, shown in Figure 443 , displays.
2. Select the pseudo event definition that you want to delete from the Pseudo Events list.
3. Click Delete.
A message displays, prompting you to confirm the deletion request.
4. Click Yes to delete the selected definition.
The definition is removed from the Pseudo Events list.