Brocade Communications Systems Network Advisor 12.0.0, User Manual

Page: 1017 / 1505

Brocade Network Advisor SAN User Manual 969
53-1002696-01
Viewing a policy monitor report
31
Viewing a policy monitor report
NOTE
You must run the policy monitor at least once before you can view a report.
To view an existing policy monitor report, complete the following steps.
1. Select Monitor > Policy Monitor.
The Policy Monitor dialog box displays.
2. Select the policy for which you want to view a report in the Monitors list.
3. Click Report.
NOTE
If you have run this policy more than once, the latest report displays.
The Policy_Name - Policy Monitor Report displays ( Figure 417 ) in a web browser.
4. Review the report details:
•
Name — Name of the policy monitor report.
•
Date — Date and time the report was finished.
•
Export button — To export a report, refer to “Exporting a policy monitor report” on
page 971.
•
E-Mail button — To e-mail a report, refer to “Exporting reports to e-mail recipients” on
page 1059.
•
Status Summary — Number of checks that passed, partially failed, failed, not applicable,
or unknown.
When a policy status fails or partially fails, the status is highlighted in pink.
•
Trigger — Trigger for the report. Valid results include Manual, Event Action, and Scheduled.
•
Run Time — Date and time the report was triggered.
•
Individual_Policy_Checks — Name of the policy check and a table displaying the results of
the check. The following information is included in the report data for each policy check:
Management Check — Displays the status of the management check. The management
check provides the following information:

Name — Name of the management check.

Status — Result of the check and reason for failure if known. Valid results include
Passed, Partially Failed, Failed, Not Applicable, and Unknown.