Brocade Communications Systems Network Advisor 12.0.0, User Manual

Page: 410 / 1505

362 Brocade Network Advisor SAN User Manual
53-1002696-01
Ports
12
Viewing port connection properties
You can view the information about products and ports on both sides of the connection.
1. Right-click the connection between two end devices on the Connectivity Map and select
Properties.
OR
Double-click the connection between two devices on the Connectivity Map.
The Connection Properties dialog box displays.
NOTE
If one of the devices is in an unknown state, the Product 1 and Product 2 information displays;
however, the Connections table information does not display.
2. Review the following information:
•
Product properties for both devices.
•
Connection properties.
•
Selected connection port properties.
Depending on the device type at either end of the connection, some of the following fields
(
Table 51 ) may not be available for all products.
TABLE 51
Port connection properties
Field Description
Product Properties table The product information for the two connected switches.
Domain ID The domain ID of the selected switch and product in xxs(yy) format,
where
xx is the normalized value and yy is the actual value.
Fabric Name The world wide name of the fabric.
IP Address The IP address of the switch.
Name The name of the switch.
WWN The world wide name of the switch.
Connections table One row for each circuit.
Status Whether the connection is Active or Missing.
1-Port # The port number of the first switch.
1-Port Type The port type of the first switch.
1-WWPN The world wide port number of the first switch.
1-MAC Address The media access control (MAC) address of the first switch.
1-IP Address The IP address of the first switch.
1-Speed (Gbps) The speed of the first switch.
1-Trunk Whether there is a trunk on the first switch.
1-Tunnel ID The tunnel ID of the first switch.
1-Circuit ID The circuit ID of the first switch.
2-Port # The port number of the second switch.