Brocade Communications Systems Network Advisor 12.0.0, User Manual

Page: 1351 / 1505

Brocade Network Advisor SAN User Manual 1303
53-1002696-01
Database tables and fields
H
LOCKED_PORT_TYPE Indicates the locked port type of the port. Ports can
be locked down so that they can come up only in that
mode. varchar 16
CATEGORY Denotes the category of the switch. 1 denotes FC
port and 2 denotes gige port. smallint
PROTOCOL The protocol used by the port. FC, FCIP etc. varchar 16
SPEED Actual speed at which the port is currently operating. varchar 64
SPEEDS_SUPPORTED The supported port speed as a list of comma
separated values. varchar 32
MAX_PORT_SPEED The maximum speed the port is capable of
supporting, in bits per second. int
DESIRED_CREDITS How many BB credits are desired for the port. int
BUFFER_ALLOCATED How many BB credits are allocated for the port. int
ESTIMATED_DISTANCE The estimated physical distance of the connection
between ports. int
ACTUAL_DISTANCE The physical distance of the connection on the port in
relation to the other port. int
LONG_DISTANCE_SETTING Whether long distance enabled. int
DEGRADED_PORT Denotes if the port is in a degraded state. Has value
as N/A for ports that are not online. varchar 16
REMOTE_NODE_WWN Node WWN of the attached port. varchar 255
REMOTE_PORT_WWN WWN of the attached port. varchar 255
LICENSED 1 = the port is licensed; otherwise, 0. smallint
SWAPPED 1 = port is swapped; otherwise, 0. smallint
TRUNKED 1 = port is trunked; otherwise, 0. smallint
TRUNK_MASTER 1 = the port is trunk master; otherwise, 0. smallint
PERSISTENT_DISABLE 1 = port is persistently disabled. smallint
FICON_SUPPORTED 1 = FICON is supported; otherwise, 0. smallint
BLOCKED 1 = port is blocked; otherwise, 0. smallint
PROHIBIT_PORT_NUMBERS Indicates the ports prohibited with the current port as
configured in the allow prohibit matric (PDCM).
varchar 1024
PROHIBIT_PORT_COUNT The count of prohibited ports. smallint
NPIV Whether NPIV mode is enabled. smallint
NPIV_CAPABLE Instance NPIV mode capability:
1 = indicates port has NPIV capability
2 = NPIV license is enabled smallint
NPIV_ENABLED Whether NPIV mode is enabled. smallint
FC_FAST_WRITE_ENABLED 1 = FC fast write is enabled. smallint
ISL_RRDY_ENABLED Denotes if ISL receiver ready is enabled. smallint
RATE_LIMIT_CAPABLE Denotes if the port is capable of Rate Limiting. smallint
TABLE 334 SWITCH_PORT (Continued)
Field Definition Format Size