Brocade Communications Systems Network Advisor 12.0.0, User Manual

Page: 1102 / 1505

1054 Brocade Network Advisor SAN User Manual
53-1002696-01
Generating SAN reports
34
Generating SAN reports
To generate reports, complete the following steps.
1. Select Reports > Generate.
The Generate Reports dialog box displays.
2. Select the types of reports you want to generate.
•
Fabric Ports
•
Fabric Summary
3. Select the fabrics for which you want to generate reports.
4. Click OK.
The generated reports display in the View Reports dialog box.
NOTE
Hyperlinks in reports are active only as long as the source data is available.
5. Click Close to close the View Reports dialog box.
6. Click Yes on the “are you sure you want to close” message.
Viewing SAN reports
You can view any report generated in the SAN. To view reports, complete the following steps.
1. Select Reports > View or click the View Report icon.
The View Reports dialog box displays.
2. Select the report you want to view in the All Reports list.
If you do not see the report you want to view, generate it first by following the instructions in
“Generating SAN reports” on page 1054.
You can select reports by Time, Report Type, or User.
3. Use the buttons in the table below to navigate through and resize the report.
Icon Description
First—Click to return to the first page in the report. Greyed out when you are on the first page.
Previous—Click to return to the previous page in the report. Grayed out when you are on the
first page of the report.
Next—Click to move to the next page in the report. Grayed out when you are on the last page of
the report.
Last—Click to move to the last page in the report. Greyed out when you are on the last page of
the report.