Brocade Communications Systems Network Advisor 12.0.0, User Manual

Page: 646 / 1505

598 Brocade Network Advisor SAN User Manual
53-1002696-01
Creating a new encryption group
20
FIGURE 235
Select Key Vault dialog box for DPM
1. Enter the IP address or host name for the primary key vault. If you are clustering DPM
appliances for high availability, IP load balancers are used to direct traffic to the appliances.
Use the IP address of the load balancer.
2. Enter the name of the file that holds the Primary Key Vault’s CA Key Certificate or browse to the
desired location.
3. If you are implementing encryption on data replication LUNs used by the EMC Symmetrix
Remote Data Facility (SRDF), you must select Enabled for REPL Support.
4. Click Next.
The Specify Certificate Signing Request File Name dialog box displays ( Figure 236 ).