Brocade Communications Systems Network Advisor 12.0.0, User Manual

Page: 52 / 1505

4 Brocade Network Advisor SAN User Manual
53-1002696-01
Management server and client
1
7. Click OK on the Login Banner dialog box.
The Management application displays.
NOTE
When you launch the Management application or navigate to a new view, the SAN tab displays
with a gray screen over the Product List and Topology Map while data is loading.
Launching a remote client
To launch a remote client, complete the following steps.
1. Open a web browser and enter the IP address of the Management application server in the
Address bar.
If the web server port number does not use the default (443 if is SSL Enabled; otherwise, the
default is 80), you must enter the web server port number in addition to the IP address. For
example,
IP_Address : Port_Number .
The Management application web start screen displays.
2. Click the Management application web start link.
The Log In dialog box displays.
3. Log into another server by entering the IP address to the other server in the Network Address
field.
NOTE
The server must be the exact same version, edition, starting port number, and network size as
the client.
4. Remove a server from the Network Address list by selected the IP address and clicking Delete.
5. Enter your user name and password.
The defaults are Administrator and password, respectively. If you migrated from a previous
release, your username and password do not change.
NOTE
Do not enter Domain\User_Name in the User ID field for LDAP server authentication.
6. Select or clear the Save password check box to choose whether you want the application to
remember your password the next time you log in.
7. Click Login.
8. Click OK on the Login Banner dialog box.
The Management application displays.
NOTE
When you launch the Management application or navigate to a new view, the SAN tab displays
with a gray screen over the Product List and Topology Map while data is loading.