Brocade Communications Systems Network Advisor 12.0.0, User Manual

Page: 770 / 1505

722 Brocade Network Advisor SAN User Manual
53-1002696-01
Zoning configuration
21
Any zones or zone configurations you have changed are saved in the zone database.
Deleting a zone
1. Select Configure > Zoning > Fabric.
The Zoning dialog box displays.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select a fabric from the Zoning Scope list.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
4. Select one or more zones in the Zones list that you want to delete, then right-click and select
Delete.
A message displays asking you to confirm the deletion.
5. Click Yes to delete the selected zones.
The message closes and the zone or zones are removed from the Zones list.
NOTE
If you delete something in error, click Cancel on the Zoning dialog box to exit without saving
changes. When you reopen the dialog box, the zone is restored.
6. Click OK or Apply to save your changes.
Any zones or zone configurations you have changed are saved in the zone database.
Duplicating a zone
When you duplicate a zone, you make a copy of it in the same zone database. The first time a zone
is duplicated, the duplicate is automatically given the name <
zonelabel > _copy . On subsequent
duplications, a sequential number is assigned to the zone name, such as < zonelabel > _copy_1 ,
< zonelabel > _copy_2, and < zonelabel > _copy_3 .
1. Select Configure > Zoning > Fabric.
The Zoning dialog box displays.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select a fabric from the Zoning Scope list.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
4. Select one or more zones in the Zones list that you want to duplicate, then right-click and
select Duplicate.
The duplicated zone or zones display in the Zones list.