Brocade Communications Systems Network Advisor 12.0.0 User Manual Download Page 472

Page: 472 / 1505

424

Brocade Network Advisor SAN User Manual

53-1002696-01

Adapter port WWN virtualization

Manually assigning a FAWWN to a switch or AG port

1. Select Configure > Fabric Assigned WWN.

Right-click the switch and select Fabric Assigned WWN.

The Configure Fabric Assigned WWNs dialog box displays.

2. Select a switch port or AG port from the Fabric Assigned WWN - Configuration list.

3. Click the Auto button.

If the switch port does not have an Auto FAWWN map type and the FAWWN feature is not yet
enabled on the port, a To Be Generated message displays.

4. Click OK.

Modifying a FAWWN on a switch or AG port

1. Select Configure > Fabric Assigned WWN.

Right-click the switch and select Fabric Assigned WWN.

The Configure Fabric Assigned WWNs dialog box displays.

2. Select a switch port or AG port from the Fabric Assigned WWN - Configuration list.

3. Click the User button.

The Fabric Assigned WWNs parameters are now editable.

Deleting a FAWWN from a switch or AG port

1. Select Configure > Fabric Assigned WWN.

Right-click the switch and select Fabric Assigned WWN.

The Configure Fabric Assigned WWNs dialog box displays.

2. Select a switch port or AG port from the Fabric Assigned WWN - Configuration list.

3. Click the Delete button.

The Fabric Assigned WWN row is deleted from the Fabric Assigned WWN - Configuration list for
the selected switch port or AG port.

Summary of Contents for Network Advisor 12.0.0


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Network Advisor 12.0.0

Reviews:

Related manuals for Network Advisor 12.0.0

Brands by name

Popular brands

Brocade Communications Systems Network Advisor 12.0.0, User Manual

Search results

Summary of Contents for Network Advisor 12.0.0

Reviews:

Related manuals for Network Advisor 12.0.0

Brands by name

Popular brands