Brocade Communications Systems Network Advisor 12.0.0, User Manual

Page: 925 / 1505

Brocade Network Advisor SAN User Manual 877
53-1002696-01
Duplicating a deployment configuration
27
Duplicating a deployment configuration
1. Select Configure > Deployment.
The Deployment dialog box displays.
2. Select a deployment configuration in the Saved or Scheduled tab.
NOTE
VLAN configurations and policy-based routing configurations cannot be duplicated.
3. Click Duplicate.
A dialog box specific to the type of deployment displays. This is the same dialog box that was
used when the original deployment was created.
4. Update the dialog box with any information you want to change.
A copy of the deployment configuration is created with the name “ originalName copy n ”. For
example, if the original name is “test”, the new name is “test copy1”. If you duplicate “test”
again, the name of the second duplicate is “test copy2”.
Deleting a deployment configuration
1. Select Configure > Deployment.
The Deployment dialog box displays.
2. Select a deployment configuration in the Saved or Scheduled tab.
3. Click Delete.
4. Click Yes in the confirmation dialog.
The deployment configuration is deleted and removed from the Deployment dialog box.
If the deployment configuration is already in progress, it is not deleted.
Deploying a configuration
1. Select Configure > Deployment.
The Deployment dialog box displays.
2. Select a deployment configuration in the Saved or Scheduled tab.
3. Click Deploy.
The Deployment Status dialog box displays.
4. Click Start.
The selected configuration is deployed.
You cannot deploy configurations that are already in progress.