Brocade Communications Systems Network Advisor 12.0.0, User Manual

Page: 579 / 1505

Brocade Network Advisor SAN User Manual 531
53-1002696-01
Smart card usage
20
Registering authentication cards from the database
Smart cards that are already in the Management program’s database can be registered as
authentication cards.
1. Select Configure > Encryption from the menu task bar to display the Encryption Center
dialog box (Refer to Figure 185 on page 526).
2. Select an encryption group from the Encryption Center Devices table, then select Group >
Security from the menu task bar to display the Encryption Group Properties dialog box. The
Security tab is selected (
Figure 188 ).
FIGURE 188
Encryption Group Properties dialog box - Security tab
3. Click Register from Archive.
The Authentication Cards dialog box displays ( Figure 189 ). The table lists the smart cards that
are in the database.
FIGURE 189
Authentication Cards dialog box - registering smart cards from archive
4. Select a card from the table, then click OK.
5. Wait for the confirmation dialog box indicating initialization is done, then click OK.
The card is added to the Registered Authentication Cards table.