110
IMPORTANT
: Make sure the stub is not extended past the inner clamp in the axle housing. See Fig. 6.10.
IMPORTANT:
Two stop bolts have been placed in the axle housing to warn the operator about the
reduced stability of the sprayer with the narrow track setting. See Fig. 6.12. Going
beyond these bolts should only be done if absolutely necessary. It is preferred to operate
the sprayer with the tracking set as wide as possible.
If the narrow track spacing must be used, you
MUST
slow down and/or reduce the water
level in the tank to compensate for the narrow track width. Remember, the centre of
gravity of this sprayer is high when the tank is full.
Fig. 6.11 shows the centre to centre tracking widths when the stubs are pushed against the stop bolts.
4. Attach the tires and rims to the stubs. Torque the wheel bolts to 325 ft. lbs.
ATTENTION
F
IG
. 6.12 A
XLE
S
TUB
S
TOP
B
OLTS
AND
W
ARNING
D
ECAL
Stop Bolts
F
IG
. 6.11 T
RACKING
W
IDTHS
WITH
THE
S
TUBS
A
GAINST THE
S
TOP
B
OLTS
Bolt A
Bolt B
Standard Stub
105" c-c
88" c-c
Extended Stub
137" c-c
120" c-c
Summary of Contents for SB4000
