WARNING:
To reduce the risk of injury, user must read and understand
the operator’s manual for their paint sprayer before using
this accessory. Always wear eye protection with side
shields marked to comply with ANSI Z87.1. Failure to do
so could result in objects being thrown into your eyes,
resulting in possible serious injury. Risk of fluid injections;
do not point at people, pets, electrical devices, or the unit
itself. Turn off the paint sprayer and relieve pump pressure
before changing or adjusting accessories.
INSTALLING THE PISTOL-GRIP SPRAYER
See Figure 1.
n
Screw the collar on the high pressure hose onto the pistol-
grip sprayer by turning the hose collar clockwise.
n
Use an adjustable wrench to hold the nut on the pistol-grip
sprayer and another to turn and tighten the nut on hose
end and tighten securely.
INSTALLING SPRAY TIP AND NOZZLE TIP
GUARD
See Figure 2.
See paint sprayer operator’s instructions for spraying, priming,
and cleaning
before installing nozzle tip guard and spray tip.
Note all warnings regarding use of pistol-grip sprayer and the
possibility of injection.
n
Turn lock-off thumbscrew counterclockwise to lock sprayer
trigger.
n
Select spray tip and push securely into nozzle tip guard.
n
Install tip saddle and tip seal into nozzle tip guard.
n
Thread nozzle tip guard assembly onto sprayer and tighten
securely.
n
Keep pistol-grip sprayer trigger locked when not in use.
USING THE PISTOL-GRIP SPRAYER
See Figure 3.
Always lock the pistol-grip sprayer trigger when you have
stopped spraying to prevent the sprayer from being bumped
or triggered accidentally and causing injection.
n
Pull back and hold the trigger to operate the pistol-grip sprayer.
n
Release the trigger to stop the flow of paint through the
nozzle.
To engage the lock-off:
n
Turn lock-off thumbscrew counterclockwise.
To disengage the lock-off:
n
Turn lock-off thumbscrew clockwise.
PISTOL-GRIP SPRAYER
ACR200BG
Fig. 1
HOSE
COLLAR
NUT
LOCK
OFF
LOCK-OFF
THUMBSCREW
LOCK-OFF
THUMBSCREW
REVERSIBLE
SPRAY TIP
NOZZLE TIP
GUARD
TIP
SADDLE
TIP SEAL
TRIGGER
SPRAY
PISTOL-GRIP
SPRAYER
Fig. 2
Fig. 3
