SPECIFICATIONS
Maximum Pressure
3000 psi
WARNING:
This product, and the paints designed to be applied with
this product, may contain chemicals, including lead,
known to the State of California to cause cancer, birth
defects, or other reproductive harm.
Wash hands after
handling.
CALIFORNIA PROPOSITION 65
Fig. 4
LOCK-OFF
THUMBSCREW
TRIGGER
GUARD
SPRAYER
HANDLE
SPRAYER
NUT
LOCK NUT
FILTER
TRIGGER
HEX SOCKET
SCREW
CLEANING THE PISTOL-GRIP SPRAYER
See Figure 4.
n
Turn off the paint sprayer and relieve pump pressure.
n
Check that pistol-grip sprayer trigger is locked off.
n
Remove pistol-grip sprayer from the high pressure hose
using two adjustable wrenches.
n
Unscrew hex socket screw and lock nut to release trigger
guard from plate on the base of sprayer.
n
Using wrench, turn handle counterclockwise to remove.
n
Remove filter from handle, noting direction of filter.
n
Thoroughly clean filter container with water (for water based
paints) or Klean Strip
®
Revolutionary White Formula Paint
Thinner (for oil-based paints or varnish).
n
If filter has any holes, replace with new filter. NEVER
puncture filter with any object.
n
Replace filter in handle, tapered end down facing back of
sprayer. Sprayer will not work if filter is improperly inserted
in handle.
n
Reassemble pistol-grip sprayer in reverse order, tighten
securely.
TROUBLESHOOTING
PROBLEM
CAUSE
POSSIBLE SOLUTION
Pistol-grip sprayer leaks.
Internal sprayer parts are worn or
damaged.
Contact Authorized Service Center.
Nozzle tip guard leaks.
Nozzle tip guard or spray tip were
assembled improperly.
Reassemble according to nozzle tip guard
and spray tip assembly instructions.
Pistol-grip sprayer will not spray.
Spray tip is clogged.
Pistol-grip sprayer filter is clogged
Spray tip is not fully seated into nozzle
tip guard.
Turn spray tip 180° and spray to clean.
Clean or replace pistol-grip sprayer filter
Reassemble according to nozzle tip guard
and Spray tip assembly instructions.
Paint pattern is weak or uneven.
Pistol-grip sprayer filter is clogged
Spray tip is worn.
Material being sprayed is too thick.
Clean or replace filter
Replace spray tip.
Follow material manufacturer’s directions
and thin material as needed.
ONE WORLD TECHNOLOGIES, INC.
1428 Pearman Dairy Road, Anderson, SC 29625 • Phone 1-800-525-2579
États-Unis, Téléphone 1-800-525-2579 • USA, Teléfono 1-800-525-2579
www.ryobitools.com
