Brandt SB4000, Operator'S Manual

Page: 114 / 145

103
5.22 MAINTENANCE TABLE
Refer to the table below for routine maintenance and lubrication intervals. Service items below either daily, weekly,
annually or after the hours of usage indicated in the table. Do not limit your maintenance to the items listed. Do a
general inspection of the machine daily or more frequently if required, for any potential problems. Refer to Sections
5.1 to 5.11 for maintenance details. Copy this maintenance table to continue recording maintenance information.
DATE
SERVICED BY
10 HOURS (DAILY)
CHECK - Main Tank and Induction Tank
CHECK - Line Strainer (Clean)
CHECK - Nozzles (Clean if necessary)
CHECK - Plumbing Assemblies for Leaks
CHECK - Hose Connections and Clamps
CHECK - Wheel Bolts for Tightness
CHECK - Tank Strap
DATE
SERVICED BY
50 HOURS (WEEKLY)
LUBRICATE - Platform Pivot Pin
LUBRICATE - Main Boom Pins
LUBRICATE - Inner Boom Hinges
LUBRICATE - Centre Parallel Link Arms
LUBRICATE - Outer Boom Hinge Pins
LUBRICATE - Boom Tip Hinge Pins
LUBRICATE - 100' Outer Ext. Boom Hinge
DATE
SERVICED BY
100 HOURS (ANNUALLY)
REPACK - Wheel Bearings
CHECK - Tire Pressures
RECHARGE - Boom Accumulators to 650 psi (w/o Wind Screens)
RECHARGE - Boom Accumulators to 1500 psi (with Wind Screens)
RECHARGE - Suspension Cylinder Accumulators to 650 psi
RECHARGE - Tilt Cylinder Accumulators to 650 psi
DATE
SERVICED BY
200 HOURS (BI-ANNUALLY)
CHANGE - Filter in Hydraulic Block