Brandt SB4000, Operator'S Manual

Page: 23 / 145

12
2.9 SAFETY SIGNS
1. Keep safety signs clean and legible at all times.
2. Replace safety signs that are missing or have
become illegible.
3. Replaced parts that displayed a safety sign should
also display the current sign.
4. Safety signs are available from your Distributor or
the factory.
How to install Safety Signs:
· Be sure that the installation area is clean and dry.
· Decide on the exact position before you remove the
backing paper.
· Remove the smallest portion of the split backing
paper.
· Align the sign over the specified area and carefully
press the small portion with the exposed sticky
backing in place.
· Slowly peel back the remaining paper and carefully
smooth the remaining portion of the sign in place.
· Small air pockets can be pierced with a pin and
smoothed out using the piece of sign backing paper.
2.8 TIRE SAFETY
1. Failure to follow proper procedures when mounting a
tire on a wheel or rim can produce an explosion which
may result in serious injury or death.
2. Do not attempt to mount a tire unless you have the
proper equipment and experience to do the job.
3. Have a qualified tire dealer or repair service perform
required tire maintenance.