NetDoc User Guide
Backbone Report
can show all backbones in a given location, and can be sorted by
Backbone Type. The report detail can show pair/strand usage and attached backbone
devices.
Horizontal Link Cable Report
can be filtered by Date Tested, HL Type, or Location.
You can arrange the
Key Sheet Detail Report
by Department Name or Location.
The
Mainframe Report
can be filtered by Controller/Gateway or Connection Rating,
and also be grouped by PU ID.
You can filter the
Network Backbone Asset Report
by Backbone Asset Type,
Backbone Device, or Backbone IP Address.
Pathway Report
shows pathways selected according to Pathway Source or Pathway
Destination. The information can be grouped by Pathway Type.
Space Report
can be filtered by Department Name, Connection Rating, or Location.
TR Report
can be filtered by Backbone Type, HL Category, TR Type, or HL Rating.
The
Circuit Trace Report
can trace a circuit from a user asset, or a horizontal link,
through cross-connections and straight connections to termination hardware and ending at
a backbone asset.
You can filter the
Contact Report
by Last Name, Department, or Location.
An additional report is available from NetDoc’s List View:
The
Detail Report
gives you all details for a specific cabling category, e.g., Asset,
Termination Hardware, Horizontal Link, etc. You can generate this report by selecting
the record in the List View and clicking the Print Details button. (See
The Print Details
Button
.)
84
Summary of Contents for NetDoc
Page 1: ......
