background image

67

NAVIGATION MODE

>>>

> D

> GB

> F

> I

> E

> PL

> CZ

> H

> RU

>

You can then switch the display of en-
tire categories on (

) or off (

).

After pressing the 

 button beside a

category you can switch subcategories in
further menus on or off.

>

Confirm all your settings by pressing
the 

OK

 button.

The Warnings button

In the 

Warnings

 settings window you can

select which warnings are to be displayed
by the Navigation device or which warn-
ings are to be output.

>

Press the 

Warnings

 button in the set-

tings menu. 

The 

Warnings

 settings window appears. 

The following setting options are then
available:

Driver alerts (depending on the model)

You can have signs displayed, for 
example for dangerous curves or steep 
gradients, provided this information is 
stored in the map data.

Speed info

You can select whether speed limits are 
displayed in parallel to the navigation. 
You can also receive an audible warning 
about exceeding the speed limit. 

Danger spots

*

You can receive a warning about danger 
points such as permanent speed checks.

Note: 

There is no standardised rule in Europe
on the use of this function (warning
about speed checks). Please check the le-
gal situation in the respective country.
In Germany, for example, it is an offence
to use this function while driving.

Summary of Contents for Active 43 Series















































































































































Reviews: