Becker Active 43 Series Operating Instructions Manual Download Page 60

Page: 60 / 142

>>>

NAVIGATION MODE

> D

> GB

> F

> I

> E

> PL

> CZ

> H

> RU

Navigation settings

The navigation settings contain all the set-
tings that are relevant to the navigation
functions.

In the main menu, press

Settings

Press the

Navigation settings

button.

This will take you to the navigation set-
tings menu.

Configuration

Various pages containing functions are
available in the menu:

You can go to the next or previous page of
the settings by pressing the

and

buttons.

The Guidance info button

In the

Guidance info

settings window you

can select which additional information
you would like displayed during route
guidance.

Press the

Guidance info

button in the

settings menu.

The

Guidance info

settings window

appears.

The following settings are available:

Note:

All your settings must be confirmed by
pressing the

button. Using the

button, you can exit the current menu at
any time without having changed any-
thing.

Setting

Meaning

Lane info

When this function is en-
abled, a small arrow indi-
cates which lane you
should move into in the
case of multi-lane roads.

Summary of Contents for Active 43 Series















































































































































Search results

Summary of Contents for Active 43 Series

Reviews:

Related manuals for Active 43 Series

Brands by name

Popular brands

Becker Active 43 Series, Operating Instructions Manual

Search results

Summary of Contents for Active 43 Series

Reviews:

Related manuals for Active 43 Series

Brands by name

Popular brands