Becker Active 43 Series Operating Instructions Manual Download Page 69

Page: 69 / 142

NAVIGATION MODE

>>>

> D

> GB

> F

> I

> E

> PL

> CZ

> H

> RU

The following settings are available.

To select settings always press the field
next to the setting that you wish to
change.

Confirm your selection by pressing the

button.

The Voice guidance button

In the

Voice guidance

settings window

you can make settings relating to the voice
guidance of the Navigation device.

Press the

Voice guidance

button in the

settings menu.

The

Voice guidance

settings window

appears.

The following setting options are then
available:
•

Voice

You can select the voice that will make
the navigation announcements for the
language that has been set.

Setting

Meaning

Show signs

Select whether speed lim-
its are never displayed, al-
ways displayed or only
displayed if the limit is
exceeded.

In city

Select the amount over
the speed limit at which
you would like to receive
an acoustic warning
within built-up areas.

Out of city

Select the amount over
the speed limit at which
you would like to receive
an acoustic warning out-
side built-up areas.

Conditional
speed limits

Select whether you
would like to receive an
acoustic warning with re-
gard to speed limits
which only apply during
rainy or snowy condi-
tions, or at particular
times (

function

switched on).

Setting

Meaning

Summary of Contents for Active 43 Series















































































































































Search results

Summary of Contents for Active 43 Series

Reviews:

Related manuals for Active 43 Series

Brands by name

Popular brands

Becker Active 43 Series, Operating Instructions Manual

Search results

Summary of Contents for Active 43 Series

Reviews:

Related manuals for Active 43 Series

Brands by name

Popular brands