Becker Active 43 Series Operating Instructions Manual Download Page 91

Page: 91 / 142

NAVIGATION MODE

>>>

> D

> GB

> F

> I

> E

> PL

> CZ

> H

> RU

Enter the desired weight.

Confirm the entry in the input menu by
pressing .

Once you have performed the desired set-
tings, confirm your settings by selecting

Setting the hazardous goods category

In the profile settings press the button
for setting the hazardous goods category.

Select the required hazardous goods
category.

Selecting the truck symbol and name

If you have changed one of the saved truck
profiles, it is also possible to enter the
truck symbol and name displayed.

Press the button

to enter a different

name.

The input menu is displayed.

Enter the desired name.

Confirm the entry in the input menu by
pressing .

The name is changed.

Press the button

to change the

symbol displayed.

Select the desired symbol.

The new symbol is displayed in the
profile.

Summary of Contents for Active 43 Series















































































































































Search results

Summary of Contents for Active 43 Series

Reviews:

Related manuals for Active 43 Series

Brands by name

Popular brands

Becker Active 43 Series, Operating Instructions Manual

Search results

Summary of Contents for Active 43 Series

Reviews:

Related manuals for Active 43 Series

Brands by name

Popular brands