Becker Active 43 Series Operating Instructions Manual Download Page 99

Page: 99 / 142

TELEPHONE MODE

>>>

> D

> GB

> F

> I

> E

> PL

> CZ

> H

> RU

TELEPHONE MODE

If your navigation device has an integrated

Bluetooth

® interface, you can connect it to

a mobile phone equipped with

Bluetooth

wireless technology.
Your Navigation device can then be used as
a very comfortable hands-free unit.

Calling up the telephone mode
(only selected models)

You can call the telephone mode from the
main menu

or the map display with

the options menu displayed

To call the telephone mode, press the

Phone

button in the main menu.

Press the

Phone

button in the options

menu of the map display.

If Bluetooth is activated and the Naviga-
tion device is already connected with a cell
phone, the telephone menu is displayed.

If Bluetooth is not activated upon calling
the telephone function, the system will
prompt you to switch Bluetooth on.

Press the

Yes

button to activate

Bluetooth.

Note:

• For some cell phones equipped with

Bluetooth

® wireless technology, it is

possible that some of the functions de-
scribed are not available.

• The following descriptions assume that

Bluetooth is activated on the cell
phone. You can find out how to acti-
vate Bluetooth on your cell phone in
the cell phone’s description.

• This function must also be activated on

the mobile phone for an automatic
connection to the mobile phone.

Summary of Contents for Active 43 Series















































































































































Search results

Summary of Contents for Active 43 Series

Reviews:

Related manuals for Active 43 Series

Brands by name

Popular brands

Becker Active 43 Series, Operating Instructions Manual

Search results

Summary of Contents for Active 43 Series

Reviews:

Related manuals for Active 43 Series

Brands by name

Popular brands