Becker Active 43 Series Operating Instructions Manual Download Page 65

Page: 65 / 142

NAVIGATION MODE

>>>

> D

> GB

> F

> I

> E

> PL

> CZ

> H

> RU

Press the button

to select

whether to use 2D or 3D mode.

Press the button

to select the entire

map.

Press the button

for a split screen.

Press the button

for arrow mode.

Switching 3D buildings on/off

You can select whether or not 3D build-
ings available in towns should be dis-
played in 3D mode.

Press the

3D Buildings

button in the

map mode menu and turn the function
on

or off

Map with 3D buildings activated.

Confirm your setting by pressing the

button.

To call up the extended settings, press the

Advanced

button.

Note:

This function is only available in 3D
mode.

Summary of Contents for Active 43 Series















































































































































Search results

Summary of Contents for Active 43 Series

Reviews:

Related manuals for Active 43 Series

Brands by name

Popular brands

Becker Active 43 Series, Operating Instructions Manual

Search results

Summary of Contents for Active 43 Series

Reviews:

Related manuals for Active 43 Series

Brands by name

Popular brands